Always QUALITY First
11000 Woodside Avenue N. Santee, CA 92071 · 619.448.3392

Equipment

Our field of expertise is primarily CNC production turning, supported by secondary milling, honing (or lapping) and grinding operations. Our specialty is hydraulic valve components for aircraft and navy submarine industries. These valve components consist of slides, sleeves, pistons, shafts and ms & an fittings etc., many of which have OD tolerances of ±.0001 and linear groove & shoulder tolerances of .0005, with finishes of 8√ or better.

When requirements for heat treating, case hardening, nitriding, flash chrome or hard chrome plating, NDT inspection, and other processes are required, they are accomplished by customer-approved outside processors.

CNC Machining Centers

  • 1 Mori Seiki NL-1500SMC lathe (2007)
  • 1 Mori Seiki SL-150SMC lathe (2000)
  • 1 Mori Seiki CL-25 lathe (1997)
  • 1 Mori Seiki SL-15 lathe (1996)
  • 1 Mori Seiki SL-25B/500 lathe (1989)
  • 1 Mori Seiki SL-1B lathe (1985)
  • 1 Mori Seiki SL-1 lathe (1983)
  • Mori Seiki MV junior mill (1989)
  • Mori Seiki Duravertical mill (2014)

Grind & Hone Equipment

  • 1 Norton C-5-HD OD grinder (1969)
  • 2 Crystal Lake OD grinders
  • 1 Cincinnati #2 Centerless grinder
  • 1 Kent surface grinder (1982)
  • 1 Sunnen ML-2000 hone (1998)
  • 1 Sunnen MBB 1680 hone
  • 1 Sunnen MBB 1290 hone
  • 1 Grand Rapids tool & cutter grinder
  • 1 Bake oven. fully calibrated, including time/temp charting recorder
  • Miscellaneous precision lapping mandrels & equipment

Support Equipment (conventional)

  • 1 Brown & Sharpe Reflex model 343 CMM
  • 1 Deltronic 14" comparator
  • 1 Deltronic 16" comparator
  • 1 Microview 10" comparator. 20 x 1 power
  • 1 Mahr Digimar CX2 electronic height gauge
  • 1 Brown & Sharpe electronic height gauge
  • 1 Sheffield Modular Precisionaire air gage
  • 1 Mahr/Federal air gage 10 millionths scale
  • 1 36 piece Starrett Webber grade aa Croblox
  • 1 Carl Mahr .00005 od gauge. measures to 6"
  • 1 Mitutoyo profilometer. model no. 211
  • 1 Mahr/Federal profilometer
  • 1 Micrometers. 1" to 8" set
  • 1 Pitch micrometers with all accessories
  • 2 Height gauges. 18" and 24"
  • 2 Vernier calipers 18" and 24"
  • 1 Rockwell hardness tester
  • 1 Gauge pins
  • 3 JO block sets (81 piece)
  • 2 Surface plates 24" x 36"

Programming Department

  • 2 GibbsCAM cad/cam on Intel Macintosh
  • 2 Discus AS9102 First Article report generating software
  • 1 Dell PC wired to all CNC equipment for upload/downloading machine programs
    (also DNC capable)